Rainwater Harvesting Systems, Inc.

Wondering exactly how many points a rainwater harvesting system can provide towards a LEED certification? 

The U.S. Green Building Council, founded in 1998 and working to promote buildings that are environmentally responsible, is starting to address the regulation and evaluation gap, and has established the LEED (Leadership in Energy and Environmental Design) ranking system.

LEED evaluates commercial buildings and provides a verifiable means of demonstrating that a building is “green”. Under the LEED certification program, there are four classification levels or ratings: Certified, Silver, Gold, and Platinum. The levels are based on points awarded for the design, construction, and operation of a building. The Certified level requires a minimum of 26 points; Silver requires 33 points; Gold is 39 points; and Platinum requires 52 points out of the 69 total possible points. (HarvestH20)

A building with a rainwater harvesting system has the potential to garner up to seven LEED points as follows:

• 1 point for installing above-code measures that result in 20 percent water savings.
• 1 point for installing above-code measures that result in 30 percent water savings (typically waterless urinals or other unusual measures).
• 1 point (innovation credit) for installing above-code measures that result in 40 percent water savings (rainwater harvesting system or other water re-use).
• Up to 2 points for storm water reduction (storm water management practices).
• Up to 2 points for water-efficient irrigation
• 1 point for reducing the project’s sewage generation from use of potable water by 50% or more.

One of the most common questions regarding rainwater harvesting is:  What happens if there is a drought and my tank runs dry?  This is a very good question and illustrates how important water is to us.  The simple answer is: The same thing that happens if your well or municipal water source runs dry- you have to find more water.  However, unlike with municipal and well water, with a rainwater system you know exactly how much water you have and can ration accordingly until the next rain.  Most people assume that their municipal water source is endless and will never run dry, however, studies show that over 70% of people do not even know where their water comes from, let alone the level of the reservoir.  In reality, if the catchment area and storage tank in your rainwater system are sized appropriately, you will have an abundance of water to last through normal drought events and can always have water delivered to your storage tank if needed- which is not possible with a well or city water supply.  More often than a shortage of water, our customers request the need to have more storage capacity for the abundance of rainwater they are collecting.

Choosing the size of tank required for project can be summed up in three steps:

1. How much water can you collect and when does it fall? 
2. What is your monthly water demand and how does it change throughout the year?
3. What is your budget? A water tank is around 50% of the total cost of a system.

For every 1,000 square feet of catchment area you have, you can potentially collect 620 gallons of water for every inch of rain.

Remember:

• Only the fooprint of your catchment surface matters when calculating collection potential.  Roof slope is not considered in this equation.
• In reality, some water is always lost to splashing, evaporation, and roof washing. 
• The simplest way to calculate actual collection volume is to divide the square footage of your roof by 2.  So, a 2,000 sq. ft. catchment area will collect 1,000 gallons per inch of rain.